This function enables taping(coding), coiling, zigzag swing embroidery and general embroidery to be randomly combined in O/P. Also, automatic conversion into the coiling(taping) head or the general head is possible according to operation of embroidery mode in the coiling(taping) head mix type embroidery machine. The peripheral units for taping(coding), coiling and zigzag swing embroidery can be easily replaced and mounted. As all zigzag swing patterns are automatically generated on the basis of running stitch data, data can be easily generated. As attachment rotation is always corrected and calibrated, correct control is possible. You can conveniently exchange the frame or the material as the nipple lifts up to the standby position at the end of embroidery. The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches. You can turn the from 0˚ to 359˚ in the increments of 1˚ and also reverse the design in the X direction(mirror image). You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis. You can select the order of the needle bars up to the 99th. The same design can be repeated up to 99 times along the X and Y axis. Several designs can be repeated up to 63 times at different angles and directions. The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and to switch the frames. You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work. The frame can be moved back to its original place by simply pressing the right buttons. The frame can be moved back to the start point of the design during the embroidery work. The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching. When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches. The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product. You can delete, change, or insert stitch data and function cades (jump, finish, trimming). You can work on the specific head with a broken thread with the remaining heads left as they are. When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.