Up to 100 designs can be saved to the memory and the capacity includes two million needles. The design can be turned by 1˚ between 0˚ and 359˚. Supports mirror image conversion (X-axis conversion). Embroidery design can be increased/decreased by 1% to X or Y axis within the range from 50% to 200%. Same design can be repeated up to 99 times (X, Y axis direction). Allows repeat work up to 63 times for various designs and can modify the angle and the mirror during the repeat work. To make frame replacement convenient, frame is automatically moved to the offset position after a completion of work.Offset position can be configured from the "Parameter Setting Mode" Manual offset function allows users to manually move the frame to a certain position while embroidering. The function allows convenient applique and frame replacement during the embroidery process. Frame can be moved to its original position afterwards with simple key control. Allows frame to return to its start point during embroidery. Needle bar can be moved forward or backward in the units of 1, 100, 1000, 10000 needles and color cord without actual embroidery. Allows frame to move to the position where embroidery started from 1 to 10 times when the thread becomes cut or falls off from the frame. In case of power outage, frame is automatically returned to the position where embroidery stopped. This function greatly reduces the risk of ruining embroidery from unexpected power outage. Edit Function allows users to delete, modify, and/or insert stich data and function code such as jump, end, and trimming. Individual Head Control allows users to control each head individually and leave other heads in their original location. Design formats from other companies saved in USB memory, and floppy disk are automatically recognized and can be applied towards. Allows input/output, deletion of design using USB memory stick.